Valspar 82000C Concrete Bonding Primer, 3.78 Litres

Valspar Concrete Bonding Primer is an acrylic-based primer that penetrates and bonds to etched concrete, enhancing the adhesion of the top coat finish. Ideal for use under Valspar Porch & Floor Paints. Can be recoated in 1 hour for shorter project time.

• Size: 3.78 Litre
• Flash Point: 205 deg F
• Application Temperature – 50-90 °F
• Creates maximum adhesion for top coat finish
• Better resistance to peeling and flaking
• Goes on white
• Easy to tell where product has been applied so no areas are missed during application
• Can be recoated in 1 hour for shorter project time.

Where To Use

• Interior or exterior bare concrete.

Preparing Your Surfaces

• General: All surfaces must be clean, dry, and free of all loose, peeling paint, or contaminants. Areas where ponding water is evident should be levelled prior to application. Bare concrete: Allow 60 days minimum for new concrete to cure before painting. Clean and etch new or bare concrete with Fast Prep™ Cleaner, Degrease & Etcher. Follow all Fast Prep label instructions. Previously painted surfaces: Clean with an all-purpose cleaner (TSP or substitute) and remove gloss from shiny surfaces by sanding or using a chemical deglosser.